Trace heating

• Basics+
• Tapes+
• Cable+
• Connection sets+
• Controller+
• Accessories+
• Heating devices+
• Commercial constr.+

• Application

  • Frost protection
  • Roof and gutter deicing
  • Pond heater with heating tape
  • Plant protection with heating tape
  • Hot water
  
  
  
  

  Description

  With the self-limiting heating cables manufactured by Quintex GmbH you get an efficient and economical heating for your pond. The advantage versus e.g. heating elements or cartridge heaters is that the heat output evenly distributed over the entire floor area in the pond, not as a hot spot at one point. Customers confirm reports that the animals are only a few centimeters reside in cold months over the heating tape and so "enjoy" the direct heat radiation. The KTS systems are already pre-assembled, you only have to set the desired temperature on the control unit and provide an electrical outlet with residual current circuit breaker outlet. And the system is ready for use. At very low temperatures you shall use a cover, such as bubble pack, air balls or similar.

  Solution

  You can buy ready to plug assembled heating circuits in our webshop (heating tape + frost guard in the supply line (optional, even without) + 3m supply cable (to any length) + plug) The available length is between 1m-10m at 1m intervals from 10-20m at 2m intervals from 25m -60m in 5m intervals and from 60m up at 10m intervals.
  Pre-assembled circuit Webshop